Solar street light system can guarantee more than 15 days of normal operation in rainy weather! Its system composition is composed of LED light source (including driver), solar panel, battery (including battery holding tank), solar street light controller, street light pole (including foundation) and auxiliary material wire and several other parts. Amber-solar street light manufacturers to tell you about the wiring method of solar street lights, the following are the main methods.
1. After connecting the battery, the controller indicator is flowing condition. (Positive and negative poles connected to reverse, the controller does not work)
2. After connecting the load, press the "adjust" button three times one after another to adjust the time, the load light. (The load can not be short-circuited, or damage the controller)
3. The load does not light up, please check the load, or measure the battery voltage.
4. After connected to the light battery, the load is off, indicating that the light control is normal, and vice versa, please check the light battery.
Among the many street lights, many cities will choose to buy solar street lights, because the corresponding quality of these street lights is better. And has a good energy saving, environmental protection talent is relatively strong. Of course, when assembling the street light, it is very important to understand the corresponding matters of attention.
We should all know that once many local street lights are the choice of electric lighting, such as a sudden power outage at night, the street everywhere is a dark, what to do is very inconvenient, and people afraid of the dark are afraid to walk at night. But now there is no such trouble, because many local street lights have all been replaced by solar street lights. This kind of light is the principle of solar energy is used to lighting, daytime absorption of solar light can be converted into city electricity, there are storage batteries for charging, providing electricity to the LED light source to be used as the night lighting needs.
The above is the introduction of solar street light wiring method, of course, this is only part of the method, we can also use other methods, but no matter what method are to pay attention to personal safety.
Post time: Nov-26-2021